Add a CD or DVD Drive to a Virtual Machine in the vSphere Web Client

 

clip_image002Procedure

1. Select a virtual machine.

2. In the VM Hardware panel, click Edit Settings.

3. Click Virtual Hardware.

4. From the Add a device drop-down menu, select CD/DVD Drive and click Add device.

The new drive appears in the virtual devices list above.

5. Click the triangle next to the new drive to expand the drive options.

6. Select the type of device.

a. Select Client Device to connect the CD/DVD device to a physical DVD or CD device on the system from which you access the vSphere Web Client.

image

 

b. Select Host Device to connect the CD/DVD device to a physical DVD or CD device on the host.

image

c. Select Datastore ISO File to connect the CD/DVD device to an ISO file that is stored on a datastore accessible to the host. Below windows opens directly

image

image

7. For client or host devices, select the mode used for the connection.

a. Passthrough IDE (raw). Use mode only for remote client device access.

b. Emulate IDE. Use to access a host CD-ROM device.

The host CD-ROM device is accessed through emulation mode. Passthrough mode is not functional for

local host CD-ROM access. You can write or burn a remote CD only through pass-through mode access,

but in emulation mode you can only read a CD-ROM from a host CD-ROM device.

8. (Optional) In the drop-down menu under Virtual Device Node, select the node the drive uses in the virtual machine.

9. (Optional) Select or deselect the Connected check box to connect or disconnect the device.

10. (Optional) Select Connect At Power On to connect the device when the virtual machine powers on.

11. Click OK.